Staging and Structures for Events
3D Productions offer a range of Outdoor and Indoor staging solutions to suit your event
We have a large stock of ‘Litedeck’ staging in a variety of sizes. We can build stages, catwalks, and tiered seating to more or less any shape and size. We also stock carpet, skirting and treads.
This staging can also be used for other purposes such as building bars and we have a range of different length wheeled legs for building rolling DJ risers, drum risers and backline risers to speed up changeovers on large stages.
For more information on our equipment and rental prices please see the rental page.
For larger stages we use a modified RMD kwikform scaffolding system ideal for building on uneven ground. This is used for the bases of many of our outdoor covered stages as well as disabled viewing platforms, backstage platforms and other staging projects.
As well as outdoor stages we also have a range of front of house towers and PA towers for supporting ground stacked PA, flown PA and videowalls.
800 square metres of staging
1km of staging legs
80m of handrail for litedeck staging
33′ wide 20′ deep (10m wide, 6.1m deep).
This stage is suitable for bands and festivals especially as a staging solution for one day events. It has a 1000Kg roof loading capacity which allows for large flown lighting rigs.
PA wings are also available
This stage is towed to site by a Land Rover Discovery.
For more information on this stage see our Trailer stage hire page
Flown PA and Videowall towers
This is a PA tower designed to have a small footprint and low visual impact. It comes in 6m and 9m high versions and has a base area of only 2.3m x 2.3m. This makes it the ideal tower to use for a delay tower situated in the middle of a festival crowd. This tower can be used to fly 750Kg of PA or can be fitted with a self climbing lighting truss to provide lighting positions on uncovered outdoor stages.
Designed to complement our Dome stages these aesthetically pleasing PA towers can be built 7m or 10m high on top of a 4.8m x 4.8m kwikform base. As this base is usually tied into the stage deck this takes the total height to approximately 8.5 or 11.5m depending on the site. This construction method gives a clean level surface on which to work to set up the PA before it is flown out.
These towers are expanded versions of the Arch PA towers and are built on top of a kwikform base up to 9.6m x 4.8m. This allows room for multiple hangs of PA or videowalls. The truss configuration is modular and is available in 3 different widths and 2 different heights depending on your requirements.
This is a small FOH position built on two litedeck staging units and is big enough for a medium sized sound desk and lighting desk. It can also be used to provide cover for headphone exchanges, security checkpoints and other applications where a gazebo is not sufficient.
This is a larger FOH tower which can be built on uneven ground and is big enough for a large sound desk and lighting desk.